|
When Using a Browser |
When Using mIRC |
|
Register a nick
The user should RIGHT mouse click their
nick in the Members panel on the right side of the screen. Select
Member Profile on the panel that appears. They may now enter a password and
click the Register button followed by the OK button to close the
registration panel. |
Type /msg nickserv register
nickhere passhere and press the Enter key. The user
will put the nick name they wish to register in place of nickhere
and the password they want to use in place of passhere |
|
Identify for a registered nick Enter the password in the popup box that
appears on the screen when changing nicks online. Enter the password
in the login screen if the registered nick is used at the time the user
connects. |
Type /pass passhere
when the text prompt to identify appears in the Status window.
Substitute the correct password for passhere. |
|
Join a
room Click the Rooms tab at the top left
section of the screen. Scroll up or down to find the desired room.
Double click the room name. |
Type /join #roomnanehere
in the text entry box at the bottom of any existing window and then press
the Enter key. |
Leave
a room Click the Quit
 icon in the upper
left corner of the room window. |
Type /part #roomnamehere
in the text entry box at the bottom of any existing window and then
press the Enter key. |
|
Create a room Click the Rooms tab at the top left
section of the screen. Enter the name of the room to be created in the
box at the bottom and click the CREATE button at the bottom left.
Select New Temporary Room when prompted. |
Type /join #roomhanehere
in the text entry box at the bottom of any existing window and then press
the Enter key. |
Register a room In order to register a room the user doing
so must have a registered nick. Click the Rooms tab at the top left
section of the screen. Enter the name of the room to be created
in the box at the bottom and click the CREATE button at the bottom left.
Select New Permanent Room at the prompt. Once in the room,
click the Room Options
icon to set the room options, moderators, etc.
|
Type /msg chanserv register
#roomnamehere in the text entry box at the bottom of the screen.
This will register the name does not already belong to another user.
Once in the room, Right mouse click the center of the room window, then LEFT
click Channel Modes to access the room options control panel. |
|
Change nicks while online To change nicks after
connecting the user should first decide on a nick and them type
/nick namehere followed by the Enter key.
The term namehere should be replaced with the nick name
they want to use. |
|
Handle a lost password If a user forgets their password contact a System
Administrator via email and ask for the password to be "reset". The
Administrator will need the EXACT nickname and the users email address.
A reset password is exactly the same as the nickname (including case).
The user may then login and use the change password command to enter a new
and more secure pass. The security built into ChatSpace does not
permit anyone - including Administrators - to view passwords. |
|
Report server related issues If any server related issues
(system is down, erratic behavior, users who evade bans, etc.) to a System
Administrator. Current administrators include MWolf, Shorty or dayden |
|
Get a list of channels Click the Rooms tab in the upper left
portion of the screen |
Type /list in the text
box at the bottom of the Status window and press the Enter key. |
"Op" someone In order to Op someone, you yourself must
be Opped. |
In order to Op someone, you yourself must
be Opped. To Op a user select their Nick from the Members list
on the right of the screen by pointing at their Nick and clicking the RIGHT
mouse button. A panel will appear. Select Control
and then Op from the list that appears. |
|
"De-op" someone In order to Op someone, you yourself must
be Opped. |
In order to De-Op someone, you yourself
must be Opped. To De-Op a user select their Nick from the
Members list on the right of the screen by pointing at their Nick and
clicking the RIGHT mouse button. A panel will appear.
Select Control and then Deop from the list
that appears. |
"Ignore" a user
to ignore a user click on the
users nickname then click the button at the top
 |
Type /ignore nickhere
3 is a "complete" ignore
in the text entry box at the bottom of the window and press the Enter key.
Nickhere means the nick of the person you want to ignore.
Another method is to select the Nick you wish to ignore from the Members
list on the right of the screen by pointing at their Nick and clicking the
RIGHT mouse button. A panel will appear. Select Control
and then Ignore from the list that appears. |
|
"Un-Ignore" a user
a user click the nick of the
person youwant to ignore then click the
|
To Un-Ignore a user type /unignore
nickhere in the text entry box at the bottom of the window
and hit the Enter key. Another method is to select the Nick you wish
to unignore from the Members list on the right of the screen by pointing at
their Nick and clicking the RIGHT mouse button. A panel will appear.
Select Control and then Unignore from the
list that appears. |
"Kick" a user In order to Kick someone you must be Opped.
Use the mouse to point at the user you wish to Ban and click the LEFT mouse
button once. A red outline will appear to show that they have been selected.
Now go to the top of the screen and point the mouse at theKick
 icon and
click once. The user will be ejected from the room.
|
In order to Kick someone you must be Opped.
To Kick a user out of the channel select their Nick from the Members list on
the right of the screen by pointing at their Nick and clicking the RIGHT
mouse button. A panel will appear. Select Control
and then Kick from the list that appears. You may
also use Kick (why) which works the same but permits you to
enter a short reason for your action. |
"Silence" a user In order to Silence someone you must be
Opped.  |
In order to Silence someone you must be
Opped. To Silence a user (stop then from talking to the channel)
select their Nick from the Members list on the right of the screen by
pointing at their Nick and clicking the RIGHT mouse button. A panel
will appear. Select Control and then Devoice
from the list that appears. |
Give or Take quiet
Should a member become
disruptive, you can remove the capability for his/her text to be
seen in the room. to give or take quiet status, click on the members
nick then right click on the members nick and click on give or take
quiet status
|
Give
or take quiet, someone you must be Opped. To Un-Silence a user (allow them to speak to the channel)
select their Nick from the Members list on the right of the screen by
pointing at their Nick and clicking the RIGHT mouse button. A panel
will appear. Select Control and then Voice
from the list that appears. |
"Ban" a user
Use this function to view, add,
or delete room bans, you must be a moderator to use this functio
 |
In order to Ban someone you must be Opped.
To Ban a user (lock them out of the room) select their Nick from the Members
list on the right of the screen by pointing at their Nick and clicking the
RIGHT mouse button. A panel will appear. Select Control
and then Ban from the list that appears. You may also
use Ban (why) which works the same but permits you to enter
a short reason for your action. Ban Kick ejects the
user from the room and prevents their return. Ban Kick (why)
does likewise but permits you to give a
reaso |
|
"Un-Ban" a user
View/Delete Room Bans – By using
this function you will be able to view or delete any member bans on
your system. use this button to View/Delete Room Bans
|
You must be opped to Un-Ban a user.
Point in the middle of the channel window and click the RIGHT mouse.
Select Channel Modes. A panel will appear.
Select the banned user you wish to Un-Ban and click the Remove
button. Click OK to close the panel. |
|
Use the "Whois" command While /whois nickhere
will open a system window with results, it is usually mixed with a lot of
other extraneous data. Use the View User Profile command instead. |
Type /whois nickhere
in the text box at the bottom of the window and hit the Enter key. The
results will appear in the Status window. |
|
Have member pics posted
Members who wish to have a pic
or bio posted on the Members page of this web site should send their
Nickname and picture to
sysop@crnky.org
along with any other information they want posted. We do not accept
pictures in poor taste or commercial advertisements. Pics are
normally posted within 1 week of being received. |
|
Create a log file to create
a log file while using the browser, right click in the screen and
choose copy all, then go to start, accessories, notepad or word pad
and right click in the pad window then choose past, then click on
file save, and give the file a name. |
Click FILE then OPTIONS then LOGGING
under the IRC heading. Set the Automatically Log box to Both.
Then click OK to save the changes and exit the panel. |
|
View a user profile Point at the users name in the Members
List on the right side of the screen and click with the RIGHT mouse button.
Select Member Profile to view any information the user has entered. |
Point at the users name in the Members
List on the right side of the screen and click with the RIGHT mouse button.
Select UCentral to view any information the user has entered. |
|
Connect to NativeChat.Net
Type
http://www.NativeChat.Net into the browser address window and hit
the Enter key. this connects you to our homepage, if you go to
http://nativechat.net thsi will
connect you directly to the chat page and #native-american |
Type /server NativeChat.Net into the
text window and hit the Enter key. |
| Connect directly to a roomWhen someone connects to NativeChat.Net through the
Java (web) interface they are automatically routed to the room
#Native-American by the system. If they wish to connect to a different
room instead them they must tell their browser what room to connect to.
Normally a user connects by putting
http://www.NativeChat.Net in
their browser's address window. To be routed to a specific channel
they must include the channel or room name. For example to connect to
the room #test on connect they would enter
http://www.NativeChat.Net/?room=test into the address window of
their browser. They may also use the same command format to create
links to a specific room on a web site. In mIRC users are not sent to
a room on connect. Instead they must specify the room they wish to
visit once they are connected by using the Join command. |
Feature not available - User must enter the channel
name after connecting. See mIRC instructions for joining a channel.
(Note: Some scripts for mIRC support this feature but are generally not
worth using due to security risks.) |
|
Start a P2P Chat
Double click the name of the user you wish to speak
privately to in the Members list on the right side of the screen.
Alternately you may type /msg nickhere
in the text entry box at the bottom of the window where nickhere
is the name of the person you wish to speak to. |
|
Back To Top |
